Embossing Machine's installation and adjustment

　　Flower wheel adjustment method

　　1) Can be placed in the pressure wheel and flower wheel with A4 paper, the pressure is adjusted to 1.5kg, the flower wheel cylinder adjusts the screw cap, and it is unlimited, and then the upper and upper -mode speed button is adjusted to the position 2 position. Adjust the power to the 4th position, press the pressure wheel switch, step on the flower wheel pedal, step on the foot pedal, wait for the flower wheel to take at least a circle, then loosen, and step on the flower wheels to rise Press the pressure wheel switch to make the pressure wheel rise, remove the white paper, and check whether the pressure pattern is balanced.

　　2) When the compression is not balanced, first loosen the eccentric wheel card tight screw on the left cover board, and then rotate the eccentric wheel (clockwise direction, the flower rotation on the upper hand; The posture is until the balance is already.

　　3) After adjusting the level of the flower wheel with A4 paper, please adjust the screw hat to the screw cap with the flower wheel cylinder, so that the flower wheels and steel molds just touch it. (Avoid the wear and steel mold impact and wear)

　　4) Adjust the pressure of flower wheels according to the thin level of suture or rolling material. The thickness of the thick material is increased, and the other is smaller.

　　5) According to the materials that need to be melted, the thickness is different, and the complication of the pattern of its flower wheels, the mechanical comprehensive adjustment is adjusted below to achieve the ideal melting effect: (1) the speed of the flower wheel; (2) the flower flower Wheel pressure; (3) power size.

　　Notice:

　　When the speed of the flower wheel is low, the processing material accepts the supersonic fluctuation energy for a long time, the touches of the flower wheel and the steel mold also have a long time, and it is easier to melt.

　　When the flower wheel pressure is very high, the processing material accepts the supersonic fluctuations very much, and it is easier to melt. (In addition, the wear of the Huaman to the mold has also increased)

　　6) Flower wheel inspection: The pattern of the flower wheel must maintain sharp situation, hardness HRC60 ~ 61 °. Flower wheels that are worn and rusty are not applied to prevent the quality of the product, or the expansion of the flower wheel pressure will cause the steel mold wear to accelerate.

Read recommendations:

Aluminum blister packaging machine with filling

Slitting and cross-cutting machine

Fully automatic urine bag production line

HF Blister packing machine Processing.What are the characteristics of embossing machines and leather embossing machines

RF Polyester welding machine equipment.Do you know what an embossing machine is?