Frequency welding machine price.Installation of embossing machine?

　　1. Remove the packaging, inspect the surface and components of the equipment for signs of damage, check for loose screws, locked electronic connectors, and complete accessories.

　　2. The equipment should be placed on a flat and hard ground, with the lace machine at least 0.5m away from the heat source, at least 1m in front and behind the lace machine, and at least 0.5m on the left and right sides for easy operation.

　　3. Verify the voltage technical requirements on the label on the back of the vibration box and ensure that the information system is well grounded.

　　4. Connect the device to the power and air sources. Be sure to turn off the power switch first. Pay attention to local voltage requirements: AC220V, 50-60Hz

　　5. Connect the air pipeline to a clean, oil-free compressed air source with a rated working pressure of 0.6MPa.

　　Composite embossing machine uses high-frequency vibration waves to transmit to the surfaces of two or more materials that need to be welded. Under pressure, the material surfaces rub against each other to form a fusion between molecular layers, achieving the fusion of materials such as fabric and fabric, fabric and chemical fiber cotton, plastic film and plastic film, fabric and spray cotton, non-woven fabric, sponge, etc., thereby completing welding. Its advantages are fast, energy-saving, high fusion strength, good conductivity, no spark, and close to cold processing.

　　Machine maintenance

　　1. The accumulated water in the air filter should be discharged in a timely manner before overflowing;

　　2. After using the welding machine for a full month, the sliding parts should be wiped clean and reapplied with lubricating grease;

　　3. When cleaning the side panel and surface of the welding machine, it is strictly prohibited to use various fluxes. Neutral detergent should be used and gently wiped;

　　4. Every six months, dry compressed air should be used to blow out the dust inside the machine.

Read recommendations:

Hot Air Glue Tape Welding Machine

Automatic blood bag production line

Ultrasonic plastic welding machine

HF embossing machine sales.Leather embossing machine is a commonly used machine for processing leather products

Introduction to the Product Features of Ultrasonic Composite Machine