Genuine Leather embossing machine supplier.Installation steps and introduction of embossing machine

　　Installation steps of embossing machine

　　Disassemble the packaging, inspect the surface and various parts of the equipment for any signs of damage, check if the screws are loose, if the electrical connectors are locked, and if the accessories are complete.

　　The equipment should be placed on a flat and hard ground, and the lace machine should be at least 0.5 meters away from the heat source. It should be ensured that there is at least 1 meter in front and at least 0.5 meters on the left and right sides of the lace machine for easy operation.

　　Verify the voltage requirements on the label on the back of the vibration box and ensure that the system is well grounded. Connect the device to the power and air sources, and be sure to turn off the power switch first. Pay attention to the voltage requirements of this machine: AC220V, 50-60Hz air pipeline is connected to a clean and lubricant free compressed air source, with a rated working pressure of 0.6MPa.

　　Introduction to Embossing Machine

　　Embossing machine, also known as lace machine, is an effective sewing and embossing equipment. Mainly used for sewing, welding, cutting, embossing, etc. of synthetic fiber fabrics, the processed products have the characteristics of good water tightness, high production efficiency, no need for needle and thread accessories, smooth and free of burrs on the cutting surface, and good hand feel. Widely used in industries such as clothing, toys, food, environmentally friendly non-woven bags, masks (cup masks, flat masks, three-dimensional masks, etc.).

Read recommendations:

Semi-automatic blister molding machine

Double Head Pedal HF Wedling and Cutting Machine

Food freshness lock packaging machine

RF polymer welding machine.Working principle of embossing machine

Ultrasonic metal terminals welding machine