PVC mesh welding machine.Factors in selecting the cleaning process for ordinary embossing machines

　　1. Ultrasonic frequency: The lower the ultrasonic frequency of a regular embossing machine, the easier it is to produce cavitation in the liquid and the stronger the infection. High frequency leads to strong directionality, making it suitable for cleaning objects.

　　2. Power density: The higher the normal power density, the stronger the cavitation effect, the faster the speed, and the better the cleaning effect. But for delicate workpieces with high inner brightness, long-term high-power density cleaning can cause air pockets and decay inside the object.

　　3. Cleaning medium: Ordinary cleaning is used. There are two types of cleaning agents: chemical solvents and water-based cleaning agents. The chemical action of the cleaning medium is separate from the physical action of ordinary cleaning, thus stopping the complete cleaning of the object.

　　4. Cleaning temperature: Generally speaking, a regular embossing machine performs better in the temperature range of 30 ℃ -40 ℃. Cleaning agents, the higher the temperature, the better, and the more obvious the infection. When performing regular cleaning operations, the task temperature is between 40 ℃ and 60 ℃.

　　With the continuous development of the economy and the improvement of people's living standards, more and more businesses are starting to use automated equipment for processing. In terms of product selection, quality issues are also highly valued, so most people want a product that can meet these needs. Therefore, there are many types of mechanical equipment such as ordinary lace machines available for consumers to choose from in the market. Let me explain in detail the specific working principle of a regular lace machine below!

　　In the process of production and processing, some materials that cannot be directly used need to be processed through cutting, breaking, pressing, and other methods. But because these types of products are composed of many continuous shapes, and each part has its own unique shape and pattern, it is difficult to completely remove various internal defects by manual operation. Therefore, ordinary methods can be used to solve these problems.

　　A regular lace machine utilizes the static fluidity of liquid to achieve various special graphics or markings on different shapes and pattern parts of the board. Its process route is as follows: first, place the mold to be processed on the platform (appropriate size and thickness can be selected at this time); Then put the plastic raw materials into the storage bucket (be sure to wait for complete cooling before pouring them in). Next, activate the electrical switch button to preheat the system for 5-10 minutes; Adjust the button according to the production rate to allow the molten plastic to flow freely to the designated position. A regular lace machine uses high-frequency vibration, which can eliminate the internal stress of the material. Generally, there will be no breakage or detachment during pressing, and it has the characteristics of high automation and high yield.

　　Workpiece placement method: If the workpiece of a regular embossing machine slowly swings up and down in the cleaning tank, the better the cleaning effect, the more average and complete the cleaning.

Read recommendations:

high frequency embossing machine Vendor

HF Polyester welder supplier

TPU embossing machine custom

HF Blister packing machine custom.Troubleshooting of Ultrasonic Composite Machine

Ultrasonic copper sheet welding machine