PVC mesh welding machine.What are the main considerations of the ultrasonic lace machine

　　1. Prevent dust, corrosion, high temperature or wet working environment.

　　2. Power three-pin plug, phase line C, neutral line N, ground line G, must be firmly grounded when used.

　　3. The voltage of the machine is: AC220V(±10%), 50 ~ 60Hz. Voltage fluctuation beyond this range may cause burning of the motor, or motor speed, torque drop.

　　Voltage fluctuation is large, it is appropriate to install a regulator.

　　4. Test ultrasonic, amplitude meter pointer can be below 50.

　　5. The level of equipment consumption efficiency is closely related to the operator's proficiency level. The operator with a lower level of sophistication should adjust the speed more slowly at the beginning to ensure safety.

　　6. Regular inspection of steel molds:

　　1) The parallelism between the plane of the steel die and the flower wheel is required to be less than 0.02mm, exceeding the necessary maintenance. Maintenance is done by the manufacturer.

　　2) The working face of the steel die is worn or dented, resulting in poor fusing results, and the maintenance work is also completed by the manufacturer.

　　7. Check the working frequency matching between the steel mold and the vibration box:

Read recommendations:

Double head hydraulic pedal high frequency welding machine thick leather hot pressing branding molding

Manual high frequency roundtable rotary table welding machine plastic blister paper card welder

Automatic Urine Bag Production Line Machine

Low-Noise Cold Embossing Machine

TR-band making