RF machine.Installation instructions for ultrasonic embossing machine

　　The ultrasonic embossing machine produced by the embossing machine manufacturer is also known as the ultrasonic lace machine. It is an effective sewing and embossing device. Mainly used for stitching, melting, cutting, and embossing of fiber fabrics. The processed products have good water tightness, high production efficiency, needle free, smooth surface, and good hand feel. Ultrasonic embossing machines are widely used in clothing, toys, food, non-woven bags, and face masks (cup covers, tablets). And other industries, such as masks, three-dimensional masks, etc.

　　Installation of ultrasonic embossing machines produced by embossing machine manufacturers: disassembly of packaging, inspection of equipment surface, no damage, inspection of loose screws, locking of electrical connectors, and completeness of accessories. After completion, place the equipment on a flat and hard ground, keep the lace machine at least 0.5 meters away from the heat source, and ensure that the flowers are in good condition. At least 1 meter or 0.5 meters of space before and after the edge machine, in order to operate, check the voltage requirements on the label on the back of the hair box, ensure good system grounding, connect the equipment to the power and air sources, and turn off the switch first.

　　Before using the new machine, we must read the manual of the intensity ultrasonic press and be aware of its content. Function description of mechanical parts: Adjusting screw cover: Limiting cylinder stroke, pressure wheel cylinder: Up and down control pressure wheel, pulley switch: Pressure wheel control switch, located on the left side of the engine, lowering the pressure wheel. Machine head, mold base: fixed flower wheel, flower wheel: sewing, die-cutting parts, cooling fan: cooling the temperature of the vibration pair to enable it to work for a long time, vibration box function: amplitude display: its function refers to the resonance between ultrasonic waves. NIC oscillator and steel mold, rotating the sound wave adjustment knob can change the reading, generally adjusted to below 50. Ampere meter: indicates the working current of the ultrasonic wave, the state of the welding joint, and the resonance of the system when there is no load. Under normal circumstances, it is 0.4-0.6A, with a fixed output power of DePn. When the load is loaded, it is determined by the pressure region and the spline, with a complexity and size typically ranging from 1 to 2.5A.

Read recommendations:

Automatic Blister Cutting Machine

RF Polyester welding machine manufacturer

HF Blister packing machine wholesale

high frequency Solding machine Factory.Applicable products for lace embossing machines

RF resin welding machine equipment.What do you need to know clearly when purchasing ultrasonic composite machines?