TPU heat cutting machine.Function of ultrasonic embossing machine components

Time：2024-03-01 Views：1 source:HF embossing machine

89029f199b18fc4

　　1. Disassemble the packaging, check the surface and various parts of the equipment for any signs of damage, check whether the screws are loose, whether the electrical connectors are locked, and whether the accessories are complete.

　　2. The equipment should be placed on a flat and hard ground, and the lace machine should be at least 0.5 meters away from the heat source. It should be ensured that there is at least 1 meter in front and back of the lace machine, and at least 0.5 meters of space on the left and right for easy operation.

　　3. Verify the voltage requirements on the label on the back of the vibration box and ensure that the system is well grounded.

　　4. Connect the device to the power and air sources, and be sure to turn off the power switch first. Pay attention to the voltage requirements of this machine: AC220V, 50-60Hz

　　5. Connect the air pipeline to a clean and lubricant free compressed air source, with a rated working pressure of 0.6MPa.

　　Before using a new ultrasonic embossing machine, it is necessary to read the manual of the ultrasonic embossing machine and be familiar with the content of this manual.

　　1. Functional description of each mechanical component

　　1) Adjust the nut: limit the length of the cylinder stroke.

　　2) Pressure wheel cylinder: controls the rise and fall of the pressure wheel.

　　3) Pressure roller switch: The pressure roller control switch is located on the left side of the machine head. Click on the pressure wheel to lower

　　4) Mold base: Fixed flower wheel.

　　5) Flower wheel: a mold for sewing and cutting workpieces.

　　6) Cooling fan: dissipates the temperature of the vibrating element, allowing it to operate for a long time.

　　7) Flower wheel cylinder: controls the rise and fall of the flower wheel.

　　8) Machine head: The transmission mechanism for fixing the flower wheel.

　　9) Barometer: represents the pressure and air pressure exerted by the flower wheel on the workpiece.

　　10) Air pressure valve: Adjust the air pressure according to actual needs, and lock the nut tightly after adjustment.

Read recommendations: