frequency embossing machine wholesale.What are the processes for manufacturing embossed steel bars?

　　1. Cutting: The roller body is made of seamless steel pipe, the shaft is made of 45 round steel, and the end plate is made of Q235 steel plate. A machining allowance of 8mm is reserved according to the drawing dimensions for cutting.

　　2. Turning processing: Turning the mating surfaces of roller bodies, end plates, and shafts, and processing them according to the H9/f9 mating accuracy.

　　3. Weld the reinforcing ribs and two end shafts inside the combined roller body, pay attention to correcting the coaxiality between the two end shafts and the inner sleeve, and only weld the inner end plate on the shaft.

　　4. Install the fully welded inner sleeve into the roller body, and weld the mating junction between the inner end plate and the roller body.

　　5. Install the outer end plate on both ends of the shaft and weld the junction surface between the outer end plate and the shaft and roller body.

　　6. Anneal the welded roller blank to eliminate internal stress.

　　7. One end of the steel roller shaft is turned flat on the end face and a standard center hole is drilled.

　　8. Turning processing: Rough and fine turning of various parts of the steel roller body to the dimensions required in the drawing. The working surface roughness of the roller body should not exceed 1.6 μ M; The radial runout tolerance of the working surface of the roller on both ends of the shaft support surface (installation part of the rolling bearing) is 0.025mm; The roundness of the working surface of the roller body is 0.036mm; The matching circle of the bearing is processed with a precision of k6. Then frame the center frame and drill the end face to the size.

　　9. Process the pattern according to the pattern requirements of the patterned steel roller. Then, a hard chromium layer is plated with a thickness of 0 03-0.05mm.

　　10. Correct the static balance of the steel roller.

Read recommendations:

RF Blister packing machine Production

Ultrasonic cross-flow fan welding machine

Automatic Up-Down Table HF Welding and Cutting Machine

HF solder machine custom.The lifespan and maintenance of composite embossing machines

Fully automatic medical bag production line