high frequency cutting machine.Precautions for using embossing machines

　　The embossing machine uses high-frequency vibration waves to transmit to the surfaces of two or more materials that need to be welded. Under pressure, the material surfaces rub against each other to form fusion between molecular layers, achieving fusion between materials such as fabric and fabric, fabric and chemical fiber cotton, plastic film and plastic film, fabric and spray cotton, non-woven fabric, sponge, etc., thereby completing welding. Its advantages are fast, energy-saving, high fusion strength, good conductivity, no spark, and close to cold processing.

　　Machine maintenance:

　　1. The accumulated water in the air filter should be discharged in a timely manner before overflowing;

　　2. After using the welding machine for a full month, the sliding parts should be wiped clean and reapplied with lubricating grease;

　　3. When cleaning the side panel and surface of the welding machine, it is strictly prohibited to use various fluxes. Neutral detergent should be used and gently wiped;

　　4. Every six months, dry compressed air should be used to blow out the dust inside the machine.

　　Machine structure:

　　Embossing machine control panel: PLC program control, can choose Chinese and English display modes; The machine operation control program is developed by our company and tested repeatedly to ensure the high-precision, low fault, and high stability operation of the entire program;

　　The shape of the flower roller in the embossing machine: The pleated cotton roller is formed by corrosion on the raw material, and then processed by a high-precision grinder to ensure the smoothness and flatness of the flower roller, thereby ensuring the beauty of the product.

　　Welding mold for embossing machine: Made of Taiwan imported aluminum mold, the contact surface is treated with hard oxygen to achieve mold hardness and wear resistance, making the mold more wear-resistant and long-lasting

　　Embossing machine debugging: There are horizontal adjustment screws on the frame to adjust the balance between the mold and the flower roller, and fine adjustment screws to adjust the distance between the mold and the flower roller, ensuring the beauty of the finished product from these two aspects.

Read recommendations:

TPU embossing machine supplier

Single Head Slid Table HF Welding Machine

HF Blister packing machine Production

Leather flat embossing machine

radio frequency welder Factory.The characteristics of wireless sewing machines