Bilateral feeding hydraulic cutting bed cutter

　　Precautions for Leather Embossing Machine in Leather Products

　　1. The country needs to set up good grounding terminals.

　　2. Machines are highly sensitive to moisture and dust and should be placed in appropriate work areas

　　3. The vacuum tube of the machine generates high heat energy, so it cannot be placed next to the machine that causes high fever, nor can it be placed in a place directly exposed to solar energy. Therefore, it will affect the thermal function of the vacuum tube

　　4. After the machine has been shut down for more than 1 hour, it is necessary to wait for about 10-15 minutes before restarting to preheat the vacuum tube and protect its lifespan

　　5. The upper and lower extremes of the machine should not directly conflict with each other, and there should be insulation and working materials between them

　　6. Accidents may occur during work, high-frequency output, upper pole output terminal (i.e. upper module), meter, experimental machine or other low-frequency, low-voltage meters attempting to measure directly.

　　7. Regularly inspect extreme (lower type) insulation materials. If there is any damage, burning, or perforation, the insulation should be replaced immediately. Otherwise, sparks will be generated when continuing to work, making it impossible to complete the project.

　　8. Spark phenomena often occur (such as up and down conflicts and high-frequency output), and if maintenance is not confirmed, machine components will be damaged, affecting work

　　9. The working materials used in the production of finished products should try to avoid moisture or dust as much as possible. This type of object is prone to sparking

　　10. When the machine is turned on, you can hear the sound of the fan rotating (4KW, 5KW sound is small). This is for vacuum tube cooling. If the fan is broken, it needs to be repaired immediately. Otherwise, the vacuum tube may be damaged.

Read recommendations:

Cross-flow fan blade welding machine

high frequency embossing machine Vendor

PVC embossing machine distributors

TPU heat cutting machine.Function of ultrasonic embossing machine components

frequency Packing machine.Production method of steel plate embossing machine