Do you know how to safely operate an ultrasonic embossing machine?high frequency blister packaging machine

　　1. According to the temperature specified in the production process, heat the embossed board thirty minutes in advance. Check if the temperatures in the three temperature zones are the same.

　　2. Before starting work, Zui first checks the power switch that controls the lifting of the control panel, and checks if the safety partition and emergency stop button are reasonable. When all automatic switches are not working, do not start the operation to prevent personal safety accidents!

　　3. Install the required embossed plates (or ironing plates) according to the production process specifications. Before installing the embossed plate (or ironing plate), all embossed plates that are fixed to the fixed embossed plate (or ironing plate) should be removed, and there is no need to hang them on the anchor bolts to prevent damage to the embossed plate (or ironing plate). When replacing the trigger, the pressure cannot be adjusted too much.

　　4. When applying embossed boards, pay attention to the cleanliness and clarity of the pattern design. If there is environmental pollution, corresponding solvents and fine copper wire brushes should be used for painting. When there are standards, high-pressure water pumps and boiling water can be used for cleaning. When cleaning flower boards, remove them from the equipment and find a well ventilated area to eliminate open flames and flammable materials.

　　5. Ensure safety during board replacement. During the operation of the elevator, notify other board replacement personnel to ensure that all limbs of the personnel leave the operating platform, and that there are no other objects on the embossed board or ironing plate. Before applying an electric forklift, check the working condition of the forklift. If there is any abnormality, it is necessary to carry out maintenance to prevent accidental injury or damage to the embossed plate and ironing plate during the entire process of plate replacement.

　　6. During the entire process of board replacement, both the board replacement personnel and the actual equipment operators must be present on site. Throughout this process, attention should be paid to preventing scratches on the embossed plate. After replacing the plate, when it is confirmed that there are no scratches on the embossed plate throughout the entire process, the plate replacement personnel and equipment operators should sign the plate replacement record and indicate the replacement time (in minutes). If there are scratches, they should be reported immediately. If there is any concealment or non reporting of the situation, before the next application of the embossed board, other actual operators will detect scratches and conduct research on the board replacement personnel and previous application conditions. The obligations of embossed plate operators.

　　7. Except for felt pads and rubber pads required for work, no objects other than leather product boards should be placed on the workbench during work.

　　8. At work, wear a long sleeved top and work clothes, fasten cufflinks or put on sleeves. No need to wear rings, bracelets, bracelets, and other accessories. Don't cut your nails too short. Do not touch the heated embossing board or ironing board. Please leave the working area of the device when using the mobile app

Read recommendations:

Tabletop external vacuum packaging machine

Metal snap fastener making machine

Single side feeding hydraulic cutting bed/cutter

Semi-automatic blister vacuum forming machine.Ultrasonic lace machine

Summary and analysis of frequency converter faults in ultrasonic embossing machines?HF PVC bag welder Manufacturing