HF Shoe vamp embossing forming machine

　　Leather embossing machine manufacturer tells you the usage characteristics and maintenance of leather embossing machine

　　(1) The characteristic machine has an independent power mechanism and electrical system, which can be centrally controlled and adjusted using buttons, manual and semi-automatic working methods (the machine's working pressure, compression speed, no-load high-speed downward and deceleration stroke and range). Adjustments can be made according to the process requirements to complete the ejection process.

　　(2) Introduction to Leather Embossing Machine (also known as Embossing Machine) There are various types of liquid pressure transmission machines made using Pascal's Law. Of course, the purpose also depends on the needs. According to the type of liquid that transmits pressure, it can be divided into two categories: hydraulic presses and hydraulic presses.

　　(3) This press is suitable for the pressing process of plastic materials. Powder product molding, plastic product molding, cold (hot) extrusion metal molding, sheet stretching and transverse pressing, bending, flipping, compensation and other processes. The four column embossing machine has an independent power mechanism and electrical system, which can be centrally controlled through buttons to achieve three working modes: coordinated, manual, and semi-automatic.

　　1. The petroleum industry strictly filters before allowing the addition of fuel tanks

　　2. The working oil should be replaced once a year, and the second replacement should not exceed 3 months.

　　3. The slider should be regularly lubricated, and the appearance of the column should be kept clean at all times. Oil should be added before each operation.

　　When the nominal pressure is 500T, the concentrated load allows for an eccentricity of 40mm. Excessive eccentricity can easily cause column pulling or other adverse phenomena. Calibrate the pressure gauge and confirm it every 6 months.

　　5. The machine will stop running for a long time, so it is necessary to clean the surfaces of each processing plant and apply rust proof oil.

　　Safe operating procedures:

　　1. People who do not know the structural performance or operating procedures of the machine cannot start the machine without authorization.

　　2. Machines, maintenance, and molds cannot be adjusted during the work process.

　　When the machine detects serious oil leakage or other abnormalities (such as unreliable operation, loud noise, vibration, etc.), it cannot analyze the cause and puts the bottle into production.

　　4. Do not overload or exceed a large eccentricity.

　　5. It is strictly prohibited to exceed the large stroke of the slider. The closing height of the mold must be greater than 600mm.

　　6. Robust and reliable electrical equipment grounding

　　7. End work every day: Place the slider in a lower position.

Read recommendations:

PVC embossing machine distributors

Plastic Metal Snap Button Riveting Machine

RF Polyester welder Manufacturing

frequency embossing machine.Emerging market trends for sheet metal embossing machines

Good news: Recently, our company has shipped a large number of shoe material high frequency machines to Thailand!