HF Turntable welding and cutting machine.Usage of engraving machine

　　1. Plug in the power. Check if the power supply is connected

　　2. Power on. Check if the machine tool is connected to the computer

　　3. Load the machining program. Check if processing software has been downloaded

　　4. Manual operation. Display manual operation interface, manual operation settings

　　5. Set the origin. Determine the workpiece origin of XYZ in the machining program

　　6. Perform automatic processing. Place the sheet metal on the workbench, determine the processing speed, depth, and accuracy, and start automatic processing

　　7. Processing completed, shutdown. Confirm completion of processing and turn off power

　　The engraving machine manufacturer reminds everyone that if you want to carve double-sided labels, you can carve mirror grooves on substitute wood, then buckle them in and use 502 to stick them on and carve the other side. Isn't it very simple? The steps of a carving machine are actually so simple. Although the engraving machine can be operated through the above steps, there are still many details to pay attention to in actual operation. Although it is simple and easy to learn, it is still necessary to gradually accumulate experience in operation in order to have a very good and proficient carving technique.

Read recommendations:

Cutting machine

high frequency plastic welding machine

Metal buckle assembling machine

Small blister forming machine

HF EVA welding machine.Metal carved board equipment