HF cutting machine.Introduction of carved roller

　　Introduction of carved roller

　　In our roller production, we must first familiarize ourselves with the production technology of the roller. In the general production process, we have high requirements for the improvement of the production technology of the carved roller. First of all, we must upgrade the technology of the roller, and then we must develop the etching technology of the carved roller, which can produce different shapes and patterns. Great help for mass production.

　　In the etching technology of carving roller production, we can remove the product, if there is etching residue on the carving roller, it will have a great impact on the subsequent carving production, on the metal surface after the completion of our etching technology will produce sensitive film, this time has an impact on some ultraviolet irradiation. Therefore, our main task is to remove this etching liquid and promote our production efficiency. Exposure with ultraviolet light, followed by imaging treatment, to form the desired shape of the resistant coating coating layer, and then the acid or lye of the etching bath to produce chemical or electrochemical erosion on the exposed part, to dissolve the metal processing technology. Etching technology: 1, do not need electrodes, master and other tools, so there is no need to maintain these tools. 2, from planning to production time is short, can be used for short-term processing. 3, the physical and mechanical properties of the material are not affected by processing. 4, processing is not limited by shape, area, weight. 5, processing is not limited by hardness and brittleness.

Read recommendations:

HF Co-extruded film welding forming machine

RF Blister packing machine company

HF Blister packing machine Factory

Small knowledge of parts for fully automatic sofa cover embossing machine

RF welding and cutting machine.Embossing machine manufacturers share small knowledge about embossing machine parts