HF embossing machine equipment.Installation steps of ultrasonic embossing machine

　　Disassemble the packaging, inspect the surface and each side of the equipment for signs of damage, check for loose screws, discuss electrical locking, and ensure that all accessories are complete.

　　The equipment should be placed on a flat and hard ground, and the lace machine should be at least 0.5 meters away from the heat source. Ensure that there is at least 1 meter in front and back of the lace machine, and at least 0.5 meters of space for operation.

　　Check the voltage requirements on the label on the back of the vibration box and ensure that the system is well grounded.

　　Keep the equipment connected to the power and air sources, and be sure to turn off the power switch first.

　　Pay attention to the voltage requirements of this machine: AC220V, 50-60Hz air pipeline connected to a clean compressed air source without lubricant, with a rated working pressure of 0.6MPa.

　　Introduction to Ultrasonic Embossing Machine

　　Ultrasonic embossing machine, also known as ultrasonic lace machine, is a sewing and embossing equipment.

　　Used for stitching, melting, melting, embossing, etc. of synthetic fiber cloth. The processed products have the characteristics of good water tightness, high production compliance, no needle or thread accessories, greasy melting surface, no burrs, and good hand feel.

　　Widely used in industries such as clothing, toys, food, environmentally friendly non-woven bags, and masks.

Read recommendations:

1.5 M automatic disc high-frequency welding machine

Button Punching machine

Vertical external vacuum packaging machine

RF plastic soldering machine.Technical Parameters of EVA Embossing Machines

HF Plastic bag making machine