HF welder.common embossing machine use method

　　common embossing machine use method

　　Step 1: Connect the common machine to the power supply, close the power knife - the power supply enters the cabinet - at this time the cooling fan starts to rotate - blow the valve for heat dissipation.

　　Step 2: Power on - Turn on the power switch in the machine. At this time, the indicator on the watch box on the side of the head of the high-frequency machine is lit up, and the voltmeter has a reading tube filament. Place the voltage (low voltage) regulating switch in the appropriate gear according to the requirements of the high-frequency electromechanical source.

　　Step 3: Mold debugging, fix all molds (tools) on the electrode rack. Loosen the lock handle on the slider, turn the handwheel on the slider to make the slider rise, and then gently step on the push rod with your foot to make the head of the high-frequency machine drop, step the push rod to the end, and turn the handwheel at the end of the high-frequency machine according to the height of the mold (tool). The mold pressing surface can be in close contact with the lower electrode plate.

Read recommendations:

Plastic / Metal snap button riveting machine

double head high frequency pedal welding machine shoes Sandals leather Embossing

Automatic blister plastic forming machine with Feeding Cutting-

TPU embossing machine Vendor.The impact of using inferior PP embossing machine packaging tape

HF EVA welding machine.The Application of Metal Embossing Machine