HF welding and cutting machine.Exploration of heating method for ultrasonic embossing machine

　　High frequency embossing machine, decoration leather embossing machine can be divided into heat sealing embossing machine according to the heating method. There are three main categories of ultrasonic embossing machines, which can be further divided into many subcategories according to the usage data. Such as high-frequency decoration embossing machine, high-frequency leather embossing machine, concave convex embossing machine, knitted fabric embossing machine, ultrasonic lace machine. According to the differences in the products produced by the leather embossing machine, there are garment embossing machines, car seat cushion embossing machines, door cushion embossing machines, cutting and embossing machines, shoe leather embossing machines, luggage embossing machines, leather label embossing machines, trademark embossing machines, ultrasonic mask machines, and ultrasonic shoe insole machines.

　　Today, we will mainly explore the innovation of heating methods for hot sealing embossing machines. The embossing principle of hot sealing clothing leather embossing machines, in short, uses an electric (ultrasonic) heating pattern to transfer heat from the heating plate to the fusion surface of the concave convex plastic heating element. Melt its surface, then quickly exit the heating plate, and after heating the concave and convex heating elements, the molten surface melts, solidifies, and merges into one. The decoration leather embossing machine adopts a suction plate structure, and the whole machine is in the form of a frame, consisting of three large plates: upper template, lower template, and hot template, and is equipped with a hot mold and a concave convex plastic cold mold. The action mode is oil/pneumatic control. Set up two temperature controllers to control the temperature of the concave and convex molds separately. During welding, it is possible to set the temperature within the range of 0400 ℃ according to the actual welding requirements. Ultrasonic embossing machine manufacturers can set heating power and mold size according to the size of non plastic parts to achieve various plastic workpiece welding.

　　The concave convex hot template of the hot press embossing machine is heated by several heating tubes, and this heating method is simple to process. However, its drawbacks are self-evident, such as low heating temperature (can only be increased to 400 degrees), high power consumption (at least 10 heating tubes are required for a machine with an 800W heating tube), slow heating speed, uneven heating, and difficult maintenance (the root line of the heating tube is prone to breakage, and if it breaks, it can only replace the heating plate because of thermal expansion and contraction. The heating tube cannot be pulled out). If this idea is solved, then improvements can be made in this area. The direction of improvement is not to change the imagination and processing of the heating template, because the core of the heating template is the heating source! Since there are so many drawbacks to the difficult heating tube, what heating method can possibly replace it? The answer is - heat-resistant glass, which can be heated and then transferred to a thermal conductive template.

Read recommendations:

HF Coated banner heat sealing machine

Metal buckle assembling machine

Stretch film vacuum packaging machine

High speed blister forming machine.What are the applications of ultrasonic embossing machines?

high frequency Solding machine Factory.Ultrasonic lace machine configuration parameters