high frequency embossing machine

News

Understand real-time updates

Home >  About Us >  News >  HF welding and cutting machine > 

How to avoid scratches on the metal mesh roller of the embossing machine

Time:2024-04-17 Views:1 source:HF welding and cutting machine

  

  1. Thoroughly clean the ink tank, enclosed scraper chamber, and ink circulation system in a timely manner. After cleaning, check the dead corners of the ink tank and enclosed scraper chamber to prevent impurities and dry ink from entering again.

  2. For newly processed anilox rolls, the printing speed should not be too fast at the beginning, and the usage time should not be too long to avoid the generated ceramic powder being embedded between the scraper and the anilox roll, causing friction.

  3. Strictly control the pressure of the scraper. If the pressure is too high, the contact surface between the blade and the mesh roller will also increase, which will damage the mesh roller.

  4. Selecting high-quality scraper blades, imported scraper blades can reduce risks, while domestic blades are prone to notches in the blade edge during use.

  5. Ensure the flatness and straightness of the scraper blade installation.

  6. Ensure the use of high-quality paper and the dust removal effect on the surface of the paper.

Read recommendations:

LR Automatic Slide Table HF Welding and Cutting Machine

HF RF radio High frequency round table welding machine U disk data cable packaging

Ultrasonic plastic welding machine equipment Welder sealer for PP ABS

Filter bag hot air seam sealing machine

Principle of embossing machine

Previous:PREVIOUS:Do you know the production method of embossing rollers

Next:Next:Introduction to the manufacturing process advantages of mirror rollers in embossing machines

Request A Quote

Complete control over products allows us to ensure our customers receive the best qualityprices and service. We take great pride in everything that we do in our factory.

high frequency embossing machine