Important precautions during the operation of ultrasonic embossing edge machine.high frequency packaging machine

　　1. Regular inspection of the mold head:

　　(1) The parallelism between the flat surface of the mold head and the flower wheel should be checked regularly. It is generally requested that their parallelism be less than 0.02mm. If it exceeds this standard, it must be adjusted before working.

　　(2) If the working surface of the mold head shows wear and dents, resulting in poor fabric melting during operation, the mold head must be removed, the working surface must be ground flat, and then installed for operation

　　Embossing machine:

　　The pressure required for the machine to work is generally determined by the following factors:

　　(1) The pattern of the flower wheel is quite complex and requires a slight increase in pressure.

　　(2) The pattern of the flower wheel is not sharp enough and requires a slight increase in pressure.

　　(3) When the amplitude of the sound wave in the mold is small, the pressure needs to be slightly increased.

　　The ultrasonic embossing machine manufacturer will analyze these issues with everyone:

　　1. The ultrasonic embossing edge machine abandons the traditional process of needle and thread stitching, and is designed ergonomically, safe, and easy to operate; Can stop welding straight and curved lines. No needle or thread required,

　　To save costs and prevent the hassle of broken stitches, it can be used for straight and curved stitching processing.

　　Compared with traditional equipment, the ultrasonic lace machine has improved the sewing speed by 5 to 10 times, and the processed waste has no pinholes or water leakage, making it more waterproof and warm. Moreover, the new ultrasonic lace machine has a high level of automatic intelligence.

　　In recent years, the market scope of ultrasonic lace machines has significantly declined, but has gradually become more balanced:

　　The development of embossing edge machines has become increasingly mature. In consumer research and development, efforts are being made to shorten the development and introduction cycle, and efforts are being made to improve the growth period, which will naturally promote the development of the mature period and prolong the decline time.

Read recommendations:

HF PETG welding and cutting machine

Single head turntable high-frequency welding machine

High frequency welding machine

TPU embossing machine maker.What is the reason for the insufficient color of the leather embossing machine?

HF PVC bag welding machine supplier.Market trends and advantages of metal grade machines