Method of use and maintenance of super mirror roller.plastic solding machine

　　1. In general; When the roller is loaded into the frame; In general, it will not be arbitrarily removed; However, the service life of the roller should be extended; The scientific method is to release the oil or water in the roller; Then through the anti-rust oil; When in use, the oil is released again; Cleaning and oil removal; Then use it in the normal way.

　　2. Warm or cool the roller before use; To adjust the roller to slow rotation; This is conducive to the roller heating or cooling will not be caused by its own weight cooling and heating uneven deformation; It is a kind of way to extend the service life of the roller.

　　3. When the roller is removed from the frame; The water inside should be removed; Then the roller surface on the anti-rust oil or butter and then with PVC protection packaging and then with soft packaging for packaging; This is conducive to protect the surface of the super mirror roller and the acidic or alkaline gas in the air chemical reaction; The surface finish is reduced because of the clumps. In severe cases, the roller surface will be repaired; Cause damage.

　　4. When the roller is not in use; Be sure to lay the roller flat in the protective frame; Anti-roll surface contact with foreign matter and damage its surface quality; At the time of loading or storage; Be sure to handle lightly; Damage is strictly prohibited.

　　5. The roller produces static electricity due to friction with the material being pressed; Will absorb the powder layer in the air to the surface of the super mirror roller; When more foreign bodies are found on the roll surface within a certain period of use; To use soft cloth or sponge items with wax products; Gently wipe the roller surface from left to right (back and forth); It is beneficial to extend the high quality of the roller surface.

　　6. Machine production; When all kinds of materials enter the roll face; To the material surface is not calendered position (open to the end); Because the material will not roll; Therefore, mobile scratches caused by rapid hardening of materials sometimes occur; To produce scratches on high finish surfaces; As agreed; If it does not affect the quality, it can be extended; Affect the quality of production materials; It is necessary to send the roller processing plant surface polishing treatment; If such problems are noted in production; The abnormal problems caused by the roller can be reduced to a minimum for extended use.

Read recommendations:

1.2M Automatic disc high frequency welding machine

Cutting machine

Double Head High Frequency Plastic Pvc Welding Machine

high frequency welding and cutting machine

Aluminum plastic thermoforming machine