Operating instructions for hot paste equipment

　　1. Before starting up, please check if there are any foreign objects on the workbench, if the power supply voltage is normal, and if there is any air pressure, which must be checked before starting up.

　　2. Turn on the host power, press the start and run button, and adjust the appropriate speed, required bonding temperature, and bonding pressure according to the fabric.

　　3. When the temperature rises to the desired temperature, the fabric and lining can be placed according to the above diagram (operation diagram) for bonding work. When the fabric reaches the discharge port, turn on the cooling fan.

　　4. When the bonding is completed, press the start button switch to reset, and after about thirty minutes, the host will automatically stop. When unexpected shutdown occurs during work and the machine cannot be turned on, please use a T-shaped special wrench to rotate the upper glue stick clockwise and remove the fabric that is stuck inside the machine.

Read recommendations:

Automatic Disc High Frequency Machine

Ultrasonic metal copper wire welding machine

Bilateral feeding hydraulic cutting bed cutter

HF Polyester welder maker.Identification standards and production process for PP packaging belt production line of embossing machine

Frequency welding machine company.Introduction to Ultrasonic Composite Embossing Machine