PVC fabric welding machine.Embossing machine installation operating rules

　　First of all, what we need to do is to disassemble the emboweling machine packaging, check the surface and various parts of the equipment for traces of damage, check whether the screws are loose, whether the electrical connector is locked, and whether the accessories are complete. Then the embossing machine is placed on a flat hard surface, requiring the lace machine to be at least 0.5 meters away from the heat source, and to ensure that there is at least 1 meter before and after the lace machine, and at least 0.5 meters of space around the machine for operation.

　　Secondly, check the voltage requirements of the sign on the back of the vibration box, and ensure that the system is well grounded. Connect the embossing machine with the power and air source, pay attention to turn off the power switch first, and pay attention to the voltage requirements of the embossing machine. Finally, the air line is connected to a clean and lubricant-free compressed air source with a rated working pressure of 0.6MPa.

　　The specific operating procedures of the embossing machine are introduced to you here. I hope you can understand the relevant content through the introduction of this article, and it will be helpful to the future operation.

Read recommendations:

HF resin welder Production

Hydraulic die cutting machine

RF Polyester welder manufacturer

TPU heat cutting machine supplier.Product characteristics of ultrasonic composite machines

Radio frequency Packing machine company.The Function and Application of Ultrasonic Composite Machine