Pressure control of embossing machine.Inflatable lifeboat hot air seam sealing machine

　　The pressure required for the machine to work is generally determined by the following factors:

　　(1) The pattern of the flower wheel is quite complex and requires a slight increase in pressure.

　　(2) The pattern of the flower wheel is not sharp enough and requires a slight increase in pressure.

　　(3) When the amplitude of the sound wave in the mold is small, the pressure needs to be slightly increased.

　　(4) The processed fabric material with a higher content of synthetic fibers (such as NYLON) can have lower pressure, while the opposite (such as IC fabric) requires slightly higher pressure.

　　(5) The processed fabric is thick and thin, and thicker fabrics require slightly increased pressure.

　　(6) The processing speed varies, and a slight increase in pressure is required at high speeds.

　　Attention: If there are quality issues with domestic products, please identify the reasons that affect the quality and do not use increased pressure on the flower wheel to handle them. Due to the simple pursuit of pressure treatment, it is easy to form medium speed wear and other defects on the surface of the mold head or the flower wheel pattern. Therefore, as long as the processing quality is good, the smaller the pressure adjustment, the better.

Read recommendations:

Automatic PVC/EVA bag making machine

HF High Frequency tarpaulin Blister Sealing Plastic Welding Machine

Funny egg blister molding machine

Embossing of PU Plastic Handrails by Embossing Machines

high frequency Packing machine.After hot melt adhesive fusion, use a laminating machine for bonding