Process for selecting a wireless sewing machine.RF resin welder Factory

　　1. Before making a purchase, it is important to determine the purpose of the purchased equipment, whether it is for flow processing of quilts, opening a store to process quilts, or opening a factory. Otherwise, it will affect our later use effect.

　　2. Use a mobile phone or computer to search for relevant information on search engines such as Baidu, and see how many large computer spinning and sewing machine manufacturers are currently available in China. Conduct consultation records and comparisons, select a few of them for on-site investigation, and try to request a test run if possible, because the appearance of the machines looks similar, but the actual materials used are very different.

　　3. When conducting on-site inspections, first check the condition of the equipment. If the condition is not good, it may be a refurbished equipment. Even after painting, many defects can still be seen, such as scratches on the surface and obvious collision marks on the square tube, which cannot be repaired later. Even if it can be repaired, it cannot be restored to its original appearance.

　　4. Secondly, look at the materials used in the equipment. In order to maintain the stability of the machine during operation, spinning and sewing machines have strict requirements for materials.

　　(1) The square tube should be made of 2.5mm thick 120mm x 120mm, and the steel plate used for the upper frame should be 3mm thick.

　　(2) The steel shaft is an important guarantee for the smooth operation of machines. With a good steel shaft, the probability of needle and thread breakage will be greatly reduced, and the service life of the machine will be greatly extended. The spinning and sewing machines produced by large factories will all use steel shafts, and of course, there may also be some manufacturers who substitute substandard products, so it is important to carefully identify them.

　　(3) To ensure better overall synchronization, the selection of synchronous belts is also important. Choosing synchronous belts with steel wires is more durable.

　　(4) The computer host, motor, driver, and sewing machine head should all be carefully selected.

Read recommendations:

Single Head Slid Table HF Welding Machine

Genuine Leather embossing machine

high frequency embossing machine custom

PVC embossing machine custom.Precautions for using clothing embossing machines

HF Polyester welder price.What products are suitable for using ultrasonic embossing machines?