Radio frequency Solding machine.What measures can extend the service life of embossing machine ridge tile machinery?

　　What measures can extend the service life of embossing machine ridge tile machinery?

　　How to use the ridge tile machinery can be used for a long time, first of all, the maintenance guide of the ridge tile machinery must be recorded. We have to stick to it every day and make sure that what we do every day is good for the tile machine.

　　First, clean the surface of the machine with the back tile. The upper die press process of the ridge tile machinery is that the motor pulls the input shaft through the pulley, passes the pinion, the big gear, pulls the upper shaft, and pulls the upper die slider up and down through a series of CAM mechanisms to achieve the pressure tile. The rotation of the table is to install the gear group on the upper shaft end to drive the pin gear, move the groove wheel installed on the hexagonal wheel shaft to achieve indexing positioning, install a rotating CAM on both ends of the upper shaft and the CAM installed on the same shaft conjugate, through the positioning rod and gauge to achieve the correct positioning of the working position of the lower type. A lubricating pump is installed in the housing on both sides of the machine, and the lubricating oil is transported to each friction moving part through the oil pipe when the machine is working. A person who understands the structure, performance and operating procedures of the machine shall not start the machine. It is strictly prohibited to operate more than a small closing height, that is, from the bottom surface of the sliding box above to the small distance of all sides of the operation more than 290 kilometers, plus the height of the upper and lower mold, plus the thickness of the upper and lower mat and the thickness of the tile material, shall not exceed 290 kilometers. Mold manufacturing should be designed in accordance with this requirement to avoid machine tool accidents. The height of lubricating oil in the sliding box and both sides of the body was investigated. Equipment should be wiped frequently, keep clean, do not accumulate dirt and water.

Read recommendations:

Double Head Pedal HF Wedling and Cutting Machine leather TR band embossing

rotary spin melting welding machine

Chain Type Packaging Welding Machine

Automatic High Frequency Catheter infusion drainage urine blood bag making machine

PVC bag welding machine.Detailed information of ordinary lace machine