Slitting and cross-cutting machine

　　What are the precautions when using an ultrasonic embossing machine

　　In recent years, with the overall improvement of China's economic level, the machinery industry has developed to a new height, and various types of mechanical equipment have appeared on the market. Ultrasonic embossing machine, as a common mechanical equipment in human production and life, how much do you know about it? Actually, most mechanical equipment is very fragile, so it is important to be careful and cautious when operating it. Does anyone know what precautions to take when using it? Today, I will talk to you about the precautions during the operation of the embossing machine.

　　1. Carry out mechanical equipment inspection and process preparation before driving;

　　2. First, drive the slow car to apply pressure and heat the rolling mill. After the cutting is normal, increase the speed and pressure until the temperature meets the process requirements;

　　3. Measure the temperature of the heating roller at any time to avoid temperature differences;

　　4. Check for any gaps or knots in the uncut fabric;

　　5. Prevent metal shavings and hard debris from entering the embossing machine and damaging the rollers;

　　6. The surface of the fiber roller should avoid sticking oil stains to prevent them from seeping into the fiber roller and contaminating the fabric;

　　7. After the embossing is completed, the rolling mill should be lifted to relieve pressure, so that the roller surfaces of each rolling mill are out of contact;

Read recommendations:

Plastic / Metal snap button riveting machine

Double Head Hydraulic Pedal HF Welding Machine

RF Polyester welding machine custom

Radio frequency cutting machine.The ultrasonic lace machine is installed by changing the energy

Small blister forming machine