Ultrasonic acrylic cases welding machine.Manufacturer of ultrasonic fabric embossing machine

　　Today's main focus is on the innovation of heating methods for heat sealing devices, as well as the embossing principle of clothing and leather embossing devices with heat fusion. Simply put, it is to use an electric (ultrasonic) heating element structure to transfer the heat from the heating plate to the welding surface of the concave convex plastic heating element. Melt the surface and quickly escape from the heating plate. After heating the two concave convex surfaces, the melted surface melts and becomes hard, merging into one. The leather embossing machine adopts a full board structure, consisting of a frame, a lower template, and a hot template. It is equipped with a hot mold and a concave convex plastic cold mold, which move through oil/pneumatic ablation. Set up two temperature controllers to adjust the temperature for concave convex molding. During welding, the actual welding should be set within the range of 0400. Ultrasonic embossing machine manufacturers can set heating power and mold size that do not conform to the size of plastic parts to achieve welding of various plastic workpieces.

　　The concave convex hot template of the heat sealing machine fabric embossing machine is heated through several heating pipes, making it easy to process. However, its disadvantages are low heating temperature (can only increase to 400 degrees), high power consumption (a machine that heats up 800W needs at least 10 heating pipes), slow heating speed, uneven heating, and hard maintenance. If the heating pipeline is prone to disconnection due to thermal expansion and cooling, the heating plate can be replaced again. Understanding the mistake in this assumption can improve this aspect. The direction of improvement is not to change the assumptions and processing of the heating template. Because the core of the hot template is the heating source! Due to the numerous drawbacks of difficult heating tubes, what heating method can replace them? The answer is - heat-resistant glass, perhaps heating heat-resistant glass can enable thermal conduction on the thermal conduction template in the future

Read recommendations:

frequency embossing machine custom

HF polymer welder maker

HF Leather welder Vendor

Metal snap snap button making machine

HF PVC plastic welding machine