Ultrasonic composite machine maintenance

　　1. The accumulated water in the air filter should be discharged in a timely manner before air intake;

　　2. After each month of operation, the sliding parts of the welding machine should be wiped clean and then coated with high-quality grease;

　　3. Clean the side panel of the welding machine. It is strictly prohibited to operate various fluxes on the surface and gently wipe neutral detergents;

　　4. Every six months, dry compressed air should be used to blow out the dust inside the machine.

　　Compared with traditional equipment, the ultrasonic composite embossing machine adopts wireless stitching, with strong adhesive force, clear embossing, and more three-dimensional relief effect in details. The product is more beautiful, and the welding time is short. Because there is no needle and thread, it saves the trouble of replacing the needle and thread. The sewing speed is increased by 510 times. After processing, the finished product has no needle holes and no water leakage, which is more waterproof and insulation. It maintains the roller mold and is easy to replace the mold. The manufacturer of the ultrasonic embossing machine can sew continuously changing and complex discontinuous and symmetrical patterns. Moreover, the new ultrasonic composite machine has a high degree of automatic intelligence, maintains the roller mold, and is easy to replace the mold. It can sew continuously changing and complex discontinuous and symmetrical patterns.

Read recommendations:

Manual pedal type HF welding machine

Jeans buttoning machine

cutting machine

Embossing Machine installation step

RF resin welder maker.Introduction to the processing methods of parts on CNC lathes for embossing machines