Ultrasonic copper sheet welding machine

　　Common faults and solutions of embossing machine

　　The embossing machine may encounter some common faults during use. Here are some faults and their solutions:

　　1. Unclear embossing: It may be caused by insufficient pressure or low temperature. The problem can be solved by adjusting pressure and temperature settings, or replacing worn embossing molds.

　　2. The device cannot start: It may be caused by power failure or control panel malfunction. Check the condition of the power connection and control panel, and replace relevant components if necessary.

　　3. Abnormal noise during embossing process: It may be caused by loose or worn internal parts of the equipment. Check and tighten relevant parts, or replace worn components.

　　4. Uneven heating: It may be caused by damage to the heating element or malfunction of the temperature control system. Check the heating element and temperature control system, and repair or replace them if necessary.

　　5. Equipment jamming: It may be caused by mechanical component damage or foreign objects entering the interior of the equipment. Inspect and clean the interior of the equipment, or replace damaged mechanical components.

Read recommendations:

Manual Pedal Type HF Welding machine

Single Side Automatic plastic blister die Cutting Machine

Manuanl Semi automatic making bags HF/ RF welding machine

Small blister forming machine

Radio frequency cutting machine.The ultrasonic lace machine is installed by changing the energy