Ultrasonic fabric embossing machinery equipment

　　Fabric embossing machine acoustic detection adjustment. If the amplitude display policy sharply increases and exceeds 100, please press the "Audio Test" switch to indicate that the frequency is too far from the resonance point and the "Audio Adjustment" rotation needs to be adjusted. The amplitude display of the visual press machine, press the "Audio Test" search switch with your left hand (less than 3 seconds), rotate the "Audio Adjustment" knob with your right hand, and adjust the pointer to the low point. When adjusting, the embossing machine indicator does not decrease, but rotates in the opposite direction after rebounding. The mission point is when the reading of the amplitude meter indicator is within 50 and the reading of the ammeter target is below 0.6A. The manufacturer of the ultrasonic embossing machine needs to tighten the butterfly nut after adjusting the sound wave. The adjustment method of the fabric embossing machine has a long-term impact on the quality of forward embossing, so it is important to pay attention to the adjustment of the embossing machine.

　　Generally speaking, there are two types of relief roller technology: plate type and roller type. Different processes have different missions. For full plate rollers, the corroded plate roller or full plate roller with a printing net depth of about 38 microns to 42 microns is replaced with a laser plate making roller with a printing net depth of about 24 microns to 28 microns. Steel plates (embossed plates) or rollers (embossed rollers) with different patterns are used to press the surface of leather or imitate specific biological skin patterns. Ultrasonic fabric embossing machinery enterprises wrap the original particle defects of leather to improve and beautify the overall situation

　　There are two types of embossing techniques: plate type and roller type. Plate embossing is the same plate ironing machine, which includes a heated upper plate engraved with patterns and a lower plate made of fur. Moved by the ironing pressure of two uneven boards in contact, patterns appeared on the leather surface placed between them. The drum type embossing device consists of a heating drum and a pressing drum engraved with patterns. When leather passes between the two rotating drums, the patterns are pressed down.

　　Key points of operation for storing nozzles in automatic printing machines

　　If it is found to be completely useless for several consecutive days or the next time, and you are afraid of the nozzle aging, it is recommended to remove the nozzle from the equipment. The nozzle should be horizontally striped (on the spray processing chip) to prevent ink from flowing out. Then wipe the nozzle clean with alcohol and inhale with an inhaler. The user must stick the blue band on the nozzle and not let the nozzle be exposed to sunlight. Cleaning the nozzle and adding a small amount of cold water can solve common problems such as sticking heads and ink blockages.

Read recommendations:

TPU embossing machine manufacture

Single Head Slid Table HF Welding Machine

RF embossing machine Production

high frequency welding and cutting machine

high frequency Packing machine Factory.Ultrasonic lace machine function description