Ultrasonic welding machine.Installation instructions for ultrasonic embossing machines from embossing machine manufacturers

　　1. Open the equipment packaging, and the embossing machine manufacturer checks whether the surface and components of the equipment are damaged, whether the screws are loose, whether the electrical connectors are locked, and whether the accessories are complete.

　　2. The equipment should be placed on a flat and hard surface, with a minimum distance of 0.5 meters from the heat source and a minimum distance of 1 meter between the front and back of the strapping machine, and at least 0.5 meters of operating space around it.

　　3. The embossing machine manufacturer checks the voltage requirements on the label on the back of the electronic box to ensure good system grounding.

　　4. Connect the device to the power and air sources, and first turn off the power switch. Pay attention to the machine voltage requirements: AC220V, 50-60Hz.

　　5. Connect the air duct to a clean compressed air source without adding lubricant, with a rated working pressure of 0.6 MPa. Before using a new machine, the embossing machine manufacturer needs to read the instruction manual and familiarize yourself with its content.

　　6. Functional description of each mechanical component.

　　1) Adjusting the nut: Limit the length distance of the cylinder stroke.

　　2) Pressure wheel cylinder: controls the up and down of the pressure wheel.

　　3) Pressure roller switch: The pressure roller control switch is located on the left side of the machine head. Click on the scroll wheel to lower it

　　4) Mold base: Fixed flower wheel.

　　5) Flower wheel: a mold for sewing and cutting workpieces.

　　6) Cooling fan: Cooling vibration sub temperature, allowing it to work for a long time.

　　7) Flower wheel tube: controls the up and down of the flower wheel.

　　8) Head: The driving mechanism for fixing the flower wheel.

　　9) Barometer: Refers to the pressure and pressure exerted by the flower wheel on the workpiece.

　　10) Air pressure valve: Adjust the air pressure according to actual needs, and lock the nut after adjustment. The adjustment range is generally 1-10Kg/cm² Between the two.

Read recommendations:

Aluminum blister packaging machine with filling

Ultrasonic metal copper wire welding machine

1.2M Automatic disc high frequency welding machine

The perfect combination of innovation and application of aluminum foil embossing line

TPU embossing machine manufacturer.How to maintain the embossing machine packaging belt machine?