What are the ten steps of making a paper embossing roller?high frequency cutting machine

　　What are the ten steps of making a paper embossing roller?

　　The production process of burning paper embossing roller is a process production process, which not only involves the exquisite skills of process technology, but also has relevant professionals, of course, there should be advanced production equipment, which is what we usually call advanced technology and exquisite technology. It needs to pay attention to many things in the production process, which are the same for the burning paper embossing roller. Let's look at the details below.

　　1. Cutting: the roll body is made of seamless steel pipe, the shaft is made of 45 round steel, the end plate is made of Q235 steel plate, and 8mm processing allowance is set aside according to the drawing size.

　　2. Turning processing: The combination surface of the matching parts of the turning roller body, end plate and shaft is processed according to H9/f9 matching accuracy.

　　3. Weld the reinforcement bars, both ends of the shaft and other parts of the combined roller body, pay attention to correct the coaxial degree of both ends of the shaft and the inner sleeve, and only weld the inner end plate on the shaft.

　　4. Weld the complete inner set into the roller body, and combine the welding inner end plate with the roller body.

　　5. Install the outer end plate on the two ends of the shaft and weld the junction of the outer end plate with the shaft and the roller body.

　　6. Anneal the roller blank of the welding combination to eliminate the internal stress. Burnt paper embossing roller our factory mass production.

Read recommendations:

HF embossing machine maker

Ultrasonic copper sheet welding machine

Chain packaging machine

High frequency welding and cutting machine.Characteristics of ultrasonic sewing machine

Hot air seam sealing machine.Notes and application scope of ultrasonic embossing machine