frequency embossing machine Vendor.The entire cleaning process of the ultrasonic composite machine

　　Cleaning of the corona device: After confirming that the power is turned off, use a clean dry gauze dipped in 75% alcohol to wipe.

　　For the ultrasonic composite machine glue box, after emptying the original glue, about 30kg of white mineral oil must be added to dissolve the remaining glue. After emptying, about 30kg of white mineral oil must be added again to dissolve again. After thoroughly emptying, it should be used again.

　　The roller shaft at the position of the ultrasonic composite machine; Use a clean dry gauze to wipe off surface dust; If adhesive is found on the surface, organic solvents should not be used for treatment to avoid damaging the rubber roller shaft. Strong adhesive curing adhesive should be used to remove it.

　　The adhesive on the surface of the rubber roller shaft should not be treated with organic solvents to avoid damage to the rubber roller shaft. Strong adhesive curing adhesive should be used to remove it. External surface of equipment. Cleaning method: Use a clean dry gauze dipped in 75% alcohol to wipe.

Read recommendations:

Semi-automatic PVC/EVA bag making machine

Cutting bed

LR Automatic Slide Table HF Welding and Cutting Machine car auto sun visor

Ultrasonic welding machine

HF embossing machine sales.Leather embossing machine is a commonly used machine for processing leather products