high frequency Solding machine Factory.Double glazed tile machine in the use of precautions

　　Double glazed tile machine in the use of precautions

　　The center line of the roller under the two-layer glazed tile machine is on the same plane line, taking the center ring as the benchmark, the flatness does not exceed 1mm, the upper and lower rollers of each column are equal, and the interval deviation is 0.1mm. Adjust using standard measuring instruments or dashboards. The machine roller molding of the pressure plate, thick and elegant, beautiful and novel, and the appearance of flat, uniform ripple, high degree of production automation, low cost, good performance. The main products are widely used in factories, locomotive garages, hangars, sports pavilions, movie theaters and other large and medium-sized enterprises of civil buildings. Forming is the formation of materials, forming, forming and cutting after forming, the production of products flat and beautiful appearance, uniform paint, with long-term, widely used in industrial civil buildings, such as factory buildings, warehouses, locomotive warehouses, aircraft warehouses, stadiums, exhibition halls, movie theaters and other rooms and walls. Its components include: forming machine, PLC computer control system, hydraulic pump system, automatic after cutting system equipment features: double glazed tile machine using automatic control software to achieve production information management. Precautions for the use of double-layer glazed tile machine: The double-layer glazed tile machine often uses a combination structure of reinforced concrete in the design of high-rise steel structure, and should not be used in the form of adding an outer frame to the core cylinder with poor sex only for the sake of economy. Choose the huge src columns around the perimeter, and the core is the structural system that supports the frame. More than half of such high level in our country is the former. Not good for. It can be considered that in lightweight steel industry equipment, when there is a large overhang load and moving load, the door ramen can be abandoned and the mesh network is used. Basically, in areas with high snow pressure, the roof curve is conducive to snow slide (the tangent line of 50 degrees requires consideration of snow loading), and similar problems are considered in areas with high rainfall. Where construction is allowed, configuring supports on the frame is more economical than simply node-connected frames.

Read recommendations:

PVC embossing machine maker

HF resin welder Factory

HF Polyester welder equipment

Radio frequency embossing machine manufacture.Usage of embossing machine

HF Plastic bag making machine