high frequency Solding machine.Precautions for operating the fabric bonding machine

　　1. Different adhesive pressures, speeds, and temperatures should be selected based on the performance of different fabrics and adhesive linings to achieve the desired effect.

　　2. Do not place any hard objects such as scissors, rulers, needles, or other foreign objects on the workbench to avoid damaging the adhesive belt.

　　3. Placing adhesive lining is to avoid the adhesive lining being larger than the fabric as much as possible. During bonding, it is easy for the adhesive of the lining fabric to be left directly on the belt, making it difficult to clean the belt. The tension roller has severe adhesive, which can cause deformation and deviation of the belt if not cleaned for a long time.

　　4. During work, the flat laminating machine belt should be cleaned regularly, the cleaning rod and cloth should be replaced, and any foreign objects should be checked for entanglement in the tension roller. If found, it should be cleaned in a timely manner.

　　At the end of the bonding work, the entire machine must cool down and stop by itself. It is prohibited to stop the machine by turning off the power switch or emergency stop button.

Read recommendations:

HF embossing machine custom

RF Blister packing machine wholesaler

Automatic L-shape sealing & cutting machine

frequency embossing machine wholesaler.How to maintain and upkeep ultrasonic composite machines

high frequency cutter.Embossing machine control system