high frequency Solding machine.Precautions in the operation of embossing machine

　　In recent years, with the overall improvement of China's economic level, China's machinery industry has developed to a new height, a variety of new machinery and equipment appear on the market, embossing machine as a common mechanical equipment in human production and life, how much do we know about it? In fact, most mechanical equipment is very fragile, and then the operation must be careful and careful, so who knows what to pay attention to in use? Today I will tell you about the precautions in the operation of the embossing machine.

　　1. Make mechanical equipment inspection and process preparation before driving;

　　2. First drive the slow to pressure and heat the roll, and then speed up the speed and increase the pressure after everything is normal, and increase the temperature until the process requirements are met;

　　3. Measure the temperature of the heating roll at any time to avoid temperature difference;

　　4. Check whether the unembossed fabric is leaky and knotted;

　　5. Prevent metal chips and hard debris from being brought into the embossing machine to damage the roll;

　　6. The surface of the fiber roll should not adhere to the oil, so as to prevent infiltration into the fiber roll and pollution of the fabric;

　　7. Stop after embossing, the roll should be lifted to relieve pressure, so that the roll surface is out of contact;

Read recommendations:

jeans metal plastic button punching machine

Drawer type sliding table welding cutting machine shoe material shoes leather TPU EVA PU embossing

Hot Air Glue Tape Welding Machine

Metal snap fastener making machine

Ultrasonic welding machine