high frequency welding machine.Ultrasonic embossing machine installation and adjustment

　　When installing the flower wheel, the mold frame must be placed in the raised position, the left cover of the mold frame must be removed, the flower wheel must be installed, the left cover of the mold frame must be installed and the screws must be locked, and this frame can be used by Li zhuanli technology (as shown on the right). The flower wheel frame is lowered to make the flower wheel contact with the mold, and the working face of the flower wheel is parallel to the working face of the mold by adjusting the eccentric wheel.

　　Flower wheel adjustment method

　　1) A4 paper can be placed in the press wheel and flower wheel, the pressure is adjusted to 1.5KG, the flower wheel cylinder adjustment nut is turned upward, no limit, and then the upper and lower die speed buttons are adjusted to the scale 2 position. Adjust the output power to 4 position, press the press wheel switch, then step down the flower wheel pedal, step foot pedal, wait for the flower wheel to complete at least one circle, then release, step on the flower wheel pedal, let the flower wheel rise, at the same time press the pressure wheel switch, let the pressure wheel rise, take out the white paper, check whether the embossed balance.

　　2) When the embodying is unbalanced, first loosen the locking screw of the eccentric wheel on the left cover plate of the die frame, and then rotate the eccentric wheel (clockwise, the flower wheel moves upward; Counterclockwise is vice versa (Figure 1)), lock the eccentric, repeat the above action until the balance.

　　3) After adjusting the level of the flower wheel with A4 paper, please adjust the lower rotation limit of the nut of the flower wheel cylinder at the same time, so that the flower wheel is just in contact with the steel die. (Prevent flower wheel sliding and steel mold collision wear)

　　4) Adjust the pressure of the flower wheel according to the thickness of the suture or knurled material. The pressure of the thicker material is increased, and the reverse is reduced.

　　5) According to the different materials to be fused, the thickness is different, and the complexity of the pattern of the flower wheel, the force is comprehensively adjusted in the following three aspects to achieve the ideal fusing effect: (1) the linear speed of the flower wheel; (2) flower wheel pressure; (3) Ultrasonic power.

　　Attention:

　　When the Δ flower wheel speed is low, the processing material receives ultrasonic energy for a longer time, and the contact time between the flower wheel and the steel mold is also longer, which is easier to fuse.

　　When the pressure of Δ flower wheel is large, the processed material receives large ultrasonic energy and is easier to fuse. (At the same time, the wear of the flower wheel on the mold is also increased)

　　6) Flower wheel inspection:

Read recommendations:

RF Polyester welder Factory

Vertical external vacuum packaging machine

Ultrasonic plastic toys welding machine

Some knowledge points of ultrasonic sewing machine

HF embossing machine Vendor.How to Avoid Waste of Packaging Belt in PP Embossing Machine