Basic knowledge of ultrasonic composite embossing machine

　　Basic theoretical knowledge of ultrasonic composite embossing machine, whether the switch of the embossing machine belongs to the fragile ultrasonic composite embossing machine amplitude lever; The ammeter indicates 2A or above. The machine must be connected to the ground to ensure information security. The machine must be regularly organized and managed by experts. Under unavoidable circumstances, the cover of the ultrasonic vibrator cannot be opened. Ultrasonic generator design work; The machine can produce continuously for 8 hours.

　　New knowledge about ultrasonic composite embossing machine:

　　Briefly introduce the use and maintenance of ultrasonic composite embossing machine. Below is a brief introduction to the operation of ultrasonic composite embossing machine.

　　1. Turn on the power and open the casing of the ultrasonic vibrator to prevent high voltage damage or machine damage.

　　2. Machine learning needs to be grounded and reliable.

　　3. Ultrasonic generator operation, output strictly turned on.

　　4. When the ultrasonic signal generator is working, the ammeter exceeds 2A and the power capacity is insufficient (the phenomenon is that the edge is not cut and there is no hole). The power must be immediately turned off to identify the cause of the system malfunction analysis before preparing to start.

　　5. The continuous working time of the machine is 8 hours.

　　6. When the machine is not in use, release the pressure ring, cut off the air source, and release the fire wheel.

　　7. Machines must be maintained and managed by experts.

Read recommendations:

Pneumatic hot stamping machine

Double Head Pedal HF Wedling and Cutting Machine

HF Polyester welder distributors

Intelligent - Specific Embossing Machines

HF resin welder Factory.Design of PP Packaging Belt Production Line for Embossing Machine in the Workshop