Genuine Leather embossing machine company.Notes on embossing machine

　　1. Prevent dusty, corrosive, high temperature, or damp cold office environments.

　　2. The three pin power plug of the switch power supply, the live wire zero wire C, zero wire N, and grounding wire G must be reliably grounded when applied.

　　The working voltage of the device is AC380V, 50-60Hz. If the fluctuation of working voltage exceeds this range, it may cause the motor to burn out or the rated power and torque of the motor to decrease.

　　The working voltage fluctuates greatly, and it is advisable to install a stable power supply.

　　4. Check if the amplitude meter needle of the ultrasonic wave is below 50.

　　The high or low production efficiency of mechanical equipment is closely related to the mastery of the operator. For operators with lower mastery, it is advisable to adjust the speed slowly at the beginning to ensure safety.

　　6. Regular maintenance of steel formwork:

　　1) The flatness of the steel template plan and the flower wheel is specified to be less than 0.02mm, and maintenance is necessary if it exceeds this limit. The maintenance work is carried out by the manufacturer.

　　2) The excavation face of the steel template causes damage or dents, resulting in poor fusion and fracture effects. Maintenance work is also carried out by the manufacturer.

　　7. Verification of matching output power between steel formwork and vibration box:

　　Before each application, it needs to be checked first. The method is to turn on the main power switch and hold down the "audio frequency test" power switch. If one of the following conditions occurs, the frequency should be calibrated.

Read recommendations:

LR Automatic Slide Table HF Welding and Cutting Machine

Double Head Pedal HF Wedling and Cutting Machine

HF polymer welder Factory

high frequency blister packaging machine.Economical Embossing Machines

EVA welding machine sales.Continuous production line for metal carved exterior wall panels