HF Blister packing machine Processing.What are the characteristics of embossing machines and leather embossing machines

　　The main applications of the embossing machine are:

　　The embossing machine is mainly used for embossing, foaming, wrinkling, and trademark on various fabrics. It can also be used to emboss trademarks on non-woven fabrics, coatings, synthetic leather, paper, aluminum plates, imitation leather patterns, and various deep and shallow patterns and patterns.

　　Our leather embossing machine is suitable for continuous branding of various types of leather strips, with high production efficiency in embossing operations

　　Suitable for continuous branding of various types of leather strips, combined with mold operation, different molds can produce different patterns, which can be adjusted according to different materials. The required temperature and speed can achieve the color and depth of branding. The width can be freely adjusted by 15CM, and the installation of the mold shaft has a heating function. The mold installation position can be freely adjusted.

　　Easy to operate: The work panel has complete functions

　　Precautions during the production process of high frequency leather embossing machine

　　During the production process of the high frequency leather embossing machine, during high frequency heating, the mold and machined materials must be kept clean, otherwise there will be a phenomenon of fire jumping; If this phenomenon occurs, first check whether the embossing machine mold is burnt out, and if there are any gaps, they must be repaired; If the leather embossing machine mold is not clean, clean it with mold washing water/water.

　　Attention during the use of the embossing machine

　　During the use of leather embossing machines, the copper strip of the grounding wire is often subjected to pressure and is prone to damage. If necessary, replace it. The moisture in compressed air will accumulate in the water bottle. Before using the leather embossing machine every time, please drain the water in the small bottle. If the lubricating oil in the oil mist atomizer is below the indicator line, special oil needs to be added and checked regularly.

　　The leather embossing machine should be cleaned of dust once a month (especially the accumulated dust in the oscillator).

　　The mechanical activity part must be refueled once every two to three months.

Read recommendations:

Melt cut split blister packaging machine

HF high frequency Blister Heat Sealing welding Machine Usb Flash Drives

Four Station Aseptic Thermal Sealing Packing Machine

HF plastic welding machine custom.Usage of ultrasonic embossing machine

Embossing machine machine function description