HF Blister packing machine custom.Treatment method for PP packaging belt of embossing machine that cannot be hot sealed during use

　　During the use of the PP packaging belt in the embossing machine, there may be times when the mechanical sealing of the packaging belt cannot be carried out well. What should be done if this problem occurs? Let's first understand what caused it:

　　Firstly, it may be due to the deviation of the hot head position of the semi-automatic packaging machine or the deviation of the joint of the packaging belt. Just correct it.

　　Secondly, you may have replaced the packaging belt. The thickness of the original packaging belt was relatively thick, but now it is thinner, and the hot head of the semi-automatic packaging machine cannot be fully in place. Solution: Readjust the position of the hot head

　　Thirdly, place the packaging tape on the hot iron head to see if it will melt, check if the hot iron head can be inserted, and how long the machine has been in use.

　　Fourthly, it is related to the material of the packaging tape. Perhaps your batch of packaging tape raw materials contains a lot of additives. The main component of the packaging tape currently used in the market is polypropylene, commonly known as pp. A better packaging tape should have a PP content of over 95%. Other components are relatively complex, such as mixing inorganic fillers such as calcium carbonate, talc powder, wollastonite, glass fiber, etc. If there are many ingredients, the hot melt viscosity is poor.

Read recommendations:

RF Polyester welding machine

HF Blister packing machine Manufacturing

HF TPU patches embossing forming machine

HF solder machine sales.What should be paid attention to when the embossing machine is working

high frequency embossing machine sales.What are the ten steps for making a paper burning embossing roller?