HF embossing machine distributors.Routine inspection of PP packaging belt production line of embossing machine before operation

　　1. Preparation work

　　Firstly, we need to check if the equipment and PP packaging belt of the embossing machine are inserted correctly, then check if the power cord is damaged, then check if all moving parts are lubricated, and then check if the PP packaging belt production line of the embossing machine is fixed. Finally, prepare the outer packaging paper.

　　2. Precautions

　　Additionally, it should be noted that it is strictly prohibited to reach into the packaging tape and to disassemble the equipment during operation.

　　3. Operation ended

　　After operating the PP packaging belt production line of the embossing machine, remember to cut off the power and turn off the switch to prevent electric shock caused by leakage.

　　4. Operating specifications

　　Operators should have a basic understanding of equipment structure, working principles, operating procedures, and adjustment methods. Before operation, turn on the power supply and allow the PP packaging belt production line of the embossing machine to preheat for a few minutes. At the same time, adjust the length of the packaging belt, listen for any noise or smoke inside the machine, and specify the quantity to be packaged according to the thickness of the color box, instruction manual, or customer requirements for each bundle. After that, wrap it with outer packaging paper and then use the packaging belt production line to bundle it.

Read recommendations:

Automatic round table HF cutting and welding machine

Automatic RF HF plastic Blister paper card packing welding machine with taking putting robot arm

Automatic HF RF welding maching plastic blister sealing packaging

EVA welding machine distributors.Features of embossing machine products

canvas welding machine.Cloth Embossing Machine