HF embossing machine wholesale.What is the reason why the PP packaging belt of the embossing machine does not adhere?

　　1. Firstly, check if the temperature is normal. If the temperature is too high or too low, it will cause the PP packaging belt to not stick. Check the button for adjusting the temperature.

　　2. At the same time, it is also possible that due to insufficient voltage, the fusion temperature cannot be reached, and the PP packaging tape will not achieve the bonding effect. It is also possible that you accidentally replaced the packaging tape and forgot it. The PP packaging tape is too thick and cannot be glued together.

　　3. Check if the bus with PP packaging belt's hot tip is accurate and if there is any deviation. If there is deviation, just correct it.

　　4. There is a relationship between the non adhesion of PP packaging tape and the material of the packaging tape. If there are many other materials mixed in the packaging tape material, it will not adhere when used. When choosing, we must choose a packaging tape with a high PP content, so as not to cause non adhesion.

Read recommendations:

RF blister packaging machine

high frequency packaging machine

RF Polyester welder Production

high frequency Membrane structure

HF welding and cutting machine