HF resin welder manufacture.Correct operation method for PP packaging belt production line of embossing machine

　　Operation process of PP packaging belt production line for embossing machine

　　1. Before starting the PP packaging belt production line of the embossing machine. Firstly, check whether the equipment and packaging belt are inserted correctly; Secondly, check if the power supply wire is damaged, then check if all moving parts are lubricated, and finally check if the packaging belt production line is fixed and not moving.

　　2. The operator of the PP packaging belt production line of the embossing machine needs to be clear about the operation process. The operator of the packaging belt production line should have a basic understanding of the structure, working principles, operating procedures, and adjustment methods of the packaging belt mechanical equipment. Before operation, the power should be turned on, the packaging belt mechanical preheating should be allowed for a few minutes, and the length of the packaging belt should be adjusted. Of course, it is also necessary to listen to the packaging belt production line for any noise.

　　3. After the operation of the PP packaging belt production line of the embossing machine is completed, it is important to remember to cut off the power supply and turn off the switch to prevent leakage and electric shock.

Read recommendations:

LR Automatic Slide Table HF Welding and Cutting Machine car auto sun visor

Automatic HF RF welding machine PET plastic blister packaging sealing cutting edge

HF RF slide table welding machine shoe materials uppers sandals embossing shoes

Popularization of ultrasonic welding machine knowledge - the relationship between plastic properties and welding

Single side feeding hydraulic cutting bed