Leather embossing machine.The transposition problem of the tile press table

　　The tile pressing machine is mainly composed of the left and right body bottom connecting rod top chassis cover sliding seat six square runner pulley gear mechanism groove wheel mechanism CAM mechanism lubricating pump oil circuit system electric control part.

　　The rotation of the table is by the gear group installed on the upper shaft end, drive the pin gear, and move the groove wheel installed on the hexagonal rotating wheel shaft to achieve indexing positioning, each end of the upper shaft is equipped with a conjugate CAM and the press CAM installed on the same shaft, through the positioning rod and positioning disc to achieve the positioning of the lower die in the working position. In the left and right sides of the chassis, there is a lubrication pump installed, the machine works through, the oil pipe to the friction parts of the movement of lubricating oil.

　　It is strictly prohibited to work more than the small closing height, that is, the small distance from the bottom of the sliding box to the working surface of 290㎜ requires the height of the upper and lower die after closing, and the thick bottom of the upper and lower plate is added with the thickness of the tile blank, which is not allowed to exceed 290㎜. The mold should be designed according to this requirement when manufacturing the mold to avoid machine tool accidents. Often pay attention to observe the height of the lubricating oil in the sliding box and the body on both sides.

　　Equipment should be wiped frequently, keep clean, no dirt water. The machine upper die stamping process: the motor through the pulley, drive the input shaft, through the pinion, the big gear, drive the upper shaft, through a set of CAM mechanism to drive the sliding seat equipped with the upper die up and down movement, to achieve tile pressure.

Read recommendations:

HF Polyester welder equipment

HF Polyester welder Processing

high frequency packaging machine

HF embossing machine Vendor.How to Avoid Waste of Packaging Belt in PP Embossing Machine

How to correctly select the power and speed of wireless sewing machines?