PVC embossing machine Vendor.What is the reason why the PP packaging belt production line of the embossing machine is not hot?

　　Firstly, you may have replaced the packaging belt. The thickness of the packaging belt was relatively thick, but now it is thinner, and the hot head of the semi-automatic packaging machine cannot be fully in place. Solution: Readjust the position of the hot head

　　Secondly, it may be due to the deviation of the hot head position of the semi-automatic packaging machine or the deviation of the joint of the packaging belt. Just correct it.

　　Thirdly, it is related to the material of the packaging tape. Perhaps your batch of packaging tape raw materials contains a lot of additives. The main component of the packaging tape currently used in the market is polypropylene, commonly known as pp. A better packaging tape should have a PP content of over 95%. Other components are relatively complex, such as mixing inorganic fillers such as calcium carbonate, talc powder, wollastonite, glass fiber, etc. If there are many ingredients, the hot melt viscosity is poor. We suggest that you ask the supplier to provide the matching parameters.

　　Fourth: Place the packaging tape on the hot iron head to see if it will melt, check if the hot iron head can be inserted, and how long the machine has been in use.

Read recommendations:

Large Vertical Granule Packaging Machine

Semi automatic making bags welding machine Flexible film fusing and cutting

Ultrasonic plastic welding machine

Heat Shrink Wrapping Packaging Machine

High-Precision Embossing Machine