Precautions in the use of C-type steel machine

　　Manual discharge, take the work procedure: Before the equipment is used, it is necessary to check whether the connection is firm, whether the installation bolts and nuts are tightened, and enough lubricating oil should be added in the left and right chassis to start the machine for test, and carefully observe the empty car running first, whether there is vibration, noise, whether the oil window comes, whether the movement of each part is coordinated, and the mold can be installed after normal installation. When installing the mold, cut off the power supply. By manually moving the motor belt or big gear, the table is rotated, and the slide seat is raised to the specified position point, an object is supported between the table and the bottom of the slide seat, so that the seat naturally falls, causing an accident.

　　The high-altitude slip method refers to the installation method of splicing the striped embossing machine unit into a whole by sliding it into a single (or one by one) slide to the design position on the pre-set slide rail. Since the grid in the high-altitude sliding method is an aerial operation, it has no impact on the internal construction of the building, and the installation of the grid can be parallel to the other construction at the lower part, speeding up the construction progress, shortening the construction period, and eliminating the need for large equipment and traction equipment. It is especially suitable for the straddling project and the need to carry out three-dimensional cross-construction using the above grid frame. Construction is the control of synchronous slip of sliding unit.

Read recommendations:

Automatic Blister Cutting Machine

Automatic blister edge folding machine

RF Polyester welding machine equipment

high frequency Packing machine manufacture.What is the meaning, function, and installation of ultrasonic laminating machine?

Clothing embossing machine