RF Blister packing machine maker.PP packaging belt production line for embossing machine

　　Identification of PP packaging belt production line for embossing machine:

　　There are the following standards for judging the quality of the PP packaging belt of the embossing machine:

　　1. The quality of the embossing machine PP packaging machine belt is generally better when it is white (other colors should be bright), as these are not easily mixed with old materials.

　　2. Some packaging machines have brand new materials on the outside and filling materials in the middle (extremely poor). As long as you cut and look at the cross-section, you can see that the black core inside is of poor quality.

　　3. The packaging machine belt should have a glossiness, and this type of packaging machine belt is generally produced from all materials. Stable tension. If the packaging machine comes with powder additives, the glossiness will be greatly reduced.

　　4. The width error of the packaging machine belt is generally plus or minus 0.3mm. In the production of such a packaging machine belt, the material is evenly cut and the quality is relatively uniform, so there will be no good or bad situations.

　　4. The packaging machine belt should have good toughness. If the embossing machine PP packaging machine belt is repeatedly folded, it is easy to break if the toughness is not good. Pattern issues, the pattern must be aesthetically pleasing, and there should be no pressure deviation.

Read recommendations:

Manual blister folding machine

HF solder machine Vendor

HF polymer welder Processing

HF Stretch ceiling film splicing machine.Flower roller price - characteristics of flower rollers

high frequency Membrane structure