RF Polyester welder Processing.Introduction to Embossing Roller and Carving Roller

　　Firstly, we need to preheat before welding. We need to improve the temperature to regulate it. Its comprehensive performance is definitely higher than the chemical properties, but steel is prone to breakage, which will affect the final effect. There is a tendency for cracking during water quenching. When the diameter is greater than 80mm, its mechanical properties are similar after quenching and tempering or normalizing. High strength and toughness can be obtained by quenching and tempering small and medium-sized mold parts.

　　The manufacturing of flower rollers requires continuous refinement to ensure that the bending deformation cannot exceed our predetermined limit under usable conditions. The surface of the flower roller should have a certain hardness and strong corrosion resistance. The coating has anti peeling ability, ensuring that the working surface of the roller has good wear resistance and corrosion resistance. The working surface of the roller should be finely machined to ensure dimensional accuracy and surface roughness.

　　When we produce rollers, we first need to familiarize ourselves with the production technology of rollers. In general, we have high requirements for improving the production technology of carved rollers. Firstly, we need to upgrade the technology of the rollers, and secondly, we need to develop the etching technology of carved rollers. Etching technology can produce different shapes and patterns of carved rollers, which is very helpful for batch production.

　　When producing the etching technology of the carving roller, we can clean the product. If there is any etching residue on the carving roller, it will have a significant impact on the subsequent carving production. After the completion of our etching technology on the metal surface, a photosensitive film will be produced, which will affect some ultraviolet radiation. Therefore, our main task is to clean this etching liquid, Promote the improvement of our production efficiency. A processing technique that involves exposing the exposed part to ultraviolet radiation and then applying imaging treatment to form a coating layer of the desired shape of the resistant coating film. The exposed part is then chemically or electrochemically eroded by acid or alkaline solution from an etching bath to dissolve the metal. Etching techniques include: 1. There is no need for tools such as electrodes and masters, so there is no need for maintenance fees for these tools. 2. The time required from planning to production is short and can be used for short-term processing. 3. The physical and mechanical properties of the material are not affected by processing. 4. Processing is not limited by shape, area, or weight. 5. Processing is not limited by hardness or brittleness.

Read recommendations:

HF polymer welder Factory

Tabletop manual turntable machine

Ultrasonic welding machine for metal wire harness

HF Blister packing machine.Different embossing machine introduction

HF PVC bag welding machine custom.What are the specific maintenance methods for ultrasonic shearing machines