Time:2023-11-07 Views:1 source:News
Steel strand embossing machine is a specialized extrusion equipment for making fixed end anchors, mainly used to press the fixed end of prestressed steel strands into pear shaped scattered flowers. Replacing the wedges that hold the steel strands can be used for other specifications of steel strands.
Scope of use
The steel strand embossing machine is a special tool used in prestressed construction to complete the embossing of steel strands for H-type anchors on site. This product has a reliable structure, reasonable design, and is lightweight and flexible, making it an ideal tool for embossing steel strands.
Due to the nominal diameter of prestressed steel strands φ 15.24 and φ There are two types of 12.7, and only the tool clip needs to be replaced in this machine. Northern products are equipped with suitable factory fashions φ Tool clips for 15.24 steel strands, if necessary for engineering purposes φ 12.7 Steel hinge wire embossing, order proposal.
The YH-40 steel strand embossing machine is used in conjunction with a 50Mpa dual circuit electric oil pump.
Structural characteristics
1. The diameter of the piston head in the top pressure cylinder is relatively large, and the embossing work can be completed at a lower pressure.
2. The rack is made of high-quality carbon structural steel plate with a thickness of 4mm, which has high strength and reliable welding.
3. The tool clip is made of 20CrMnTi material, which has a long service life.
Embossing machine operation program
1. Steel strand cutting, with the end flush and burrs removed, and no loose strands allowed.
2. Pull the handle of the steel strand embossing machine, move the tool clamp, and separate the two lobes to allow the steel strand to pass through.
3. Thread the steel strand through the tool clamp and insert it into the indenter hole.
4. Pull the handle, move the tool clamp, close the two plates, and preliminarily clamp the steel strand.
5. Start the oil pump, move the pressure head, press the steel wire into a pear shaped head, reduce the oil pressure to zero, and the embossing is completed.
6. The return cylinder is filled with oil, the piston is reset, and the pressure head moves back.
7. Pull the handle, move the tool clamp, and remove the pear shaped steel strand.
Read recommendations:
High Frequency Tarpaulin Tent Welding Machine
HF Blister packing machine manufacture
frequency welder.Explanation of adhesive point transfer in composite machines
Complete control over products allows us to ensure our customers receive the best qualityprices and service. We take great pride in everything that we do in our factory.